Título

Clutch Adjustment and Inspection

Este es un marcador de posición y no aparecerá en el sitio activo.

Solicitar cotización

Título del contenido 1

In a manual transmission, the responsibility of the clutch is to engage and disengage the transmission from the engine. A clutch in a manual transmission allows the engine to continue turning even when the vehicle is stopped. In an automatic transmission, this process is regulated by the torque converter and transmission fluid. The clutch operates two shafts, one in the transmission and the other in the engine, and uses friction to keep the transmission connected to the engine. If the clutch is engaged, the pressure plate pushes against a flywheel and joins the transmission to the engine. If the clutch is disengaged, the pressure plate pulls away from the flywheel, separating the transmission from the engine. The clutch makes switching gears possible. Some transmissions use hydraulic clutches while others use cable clutches. In both cases, routine clutch maintenance is required to keep all moving components operating efficiently. If you are concerned about the functionality of your clutch, be sure to contact us about a service.

Título del contenido 2

A slipping or sticking clutch are both signs that you should have your clutch inspected. If your clutch slips, the friction material on the clutch disc may have worn away, which will loosen the contact between the disc and the flywheel. When a clutch sticks, the clutch fails to release all the way, and leaves the engine in limited contact with the transmission. This can create grinding noises and an inability to switch between gears. Too much free play and an overly stiff clutch are signs of an impending clutch inspection or adjustment. Most clutch adjustments concerning a hydraulic clutch involve examining, draining, and refilling the fluid reservoirs. In a clutch check and adjustment involving a cable driven clutch, our service staff will check the cable on the release arm, and make the necessary adjustments on the cables and hardware in your vehicle’s clutch mechanism. Neglecting a clutch adjustment or inspection when warning signs arise can cause serious damage to your engine and transmission.

Lee's Service brinda servicios de reparación de transmisiones automáticas a Reedley, CA, Fresno, CA, Orange Cove, CA y otras áreas circundantes.

PROGRAMAR CITAS

Neumáticos comerciales y de consumo, inspecciones de smog y llamadas de servicio agrícola.

El blog de servicios de Lee

26 de octubre de 2026
Your engine air filter helps keep dust, grit, leaves, and road debris out of your engine, which supports smoother performance and better long-term reliability. The right replacement schedule depends on your vehicle, your driving habits, and the conditions around you, especially if you drive in dusty, dry, or stop-and-go areas of California. If you are unsure whether your filter is still doing its job, Lee's Service can inspect it and help you decide whether it is time for a replacement.
26 de octubre de 2026
A serpentine belt is a small-looking part with a big job: it helps transfer engine power to several important accessories under the hood. When it works well, your vehicle’s systems feel normal and dependable; when it wears out, you may notice squealing, weak electrical performance, overheating, or loss of power steering. Understanding how this car belt works can help you recognize problems early, plan maintenance, and avoid preventable breakdowns.
Gloved hands fitting a car tire onto a silver alloy wheel in a workshop
3 de septiembre de 2026
Learn how TPMS works, what the warning light means, and how to troubleshoot common issues. Get expert TPMS service near Reedley and Fresno, CA.
Show More