How to Break in Your New Car

January 15, 2021
How to Break in Your New Car

How to Break in Your New Car

You are stepping into the new year with a shiny, brand-new car. You can’t wait to take it out on the road and break it in. But how exactly do you do that? Breaking in a new car is a practice that has been recommended by manufacturers for decades. The ritual is often referred to as conventional wisdom. It involves a combination of driving techniques, precautions, and maintenance tasks to help extend a car’s lifespan. Properly breaking in your automobile will ensure that early engine wear is kept to a minimum, oil flows smoothly and evenly through all moving parts, and components such as the piston rings and transmission adjust to each other.New Car Tips

 

There are some techniques you can use to give your new car time to adjust to everyday driving conditions. Here we will highlight some of the things you need to do to break in your new vehicle. Your new ride deserves to be eased into the demands of its owners so it can perform effectively and last longer.

 

Techniques for Breaking in a New Car

 

Avoid Extreme Acceleration

When you get your new ride, we know the first thing you want to do is floor the accelerator when you get out on the open road. This can put a lot of strain on the engine oil, piston rings, and cylinders. Aggressive acceleration when the car is cold can be harmful. In the first 1,000 miles, accelerate gently and work through the gears quickly before the RPM can build too high.

 

Vary Your Engine Speed

Don’t push your new engine too hard for the first 1,000 miles. This can put a lot of strain on components. You should vary your speed while keeping the engine under 4,000 RPMs to properly break-in the engine. After that, you can gradually increase the RPM without any negative effects.

 

Avoid Hard Braking

Unless it's necessary, smooth and slow braking is the way to go. The new brake pads need at least 200 miles to properly wear-in and seat against parts like the rotors and calipers. Hard braking can cause the brake pads to wear rapidly, meaning you'll need new brake pads sooner.

 

Avoid Short Trips Which Don’t Give the Engine Time to Warm Up

Short trips aren’t ideal for brand new cars. When your engine is cold, it needs to work harder, putting a lot of strain on the oil delivery cycle. To break in your new car, take it on a long drive to let the engine warm through.

 

 

Aside from following the break-in guidelines in your car owner’s manual, proper maintenance will also help to extend the longevity of your car. Oil changes, tire maintenance, brakes, engine diagnostics, and all fluids should be monitored regularly and topped up as needed. Breaking in your vehicle will offer improved fuel economy, reduced oil consumption, optimal engine performance, and better overall reliability.

April 15, 2025
With used car prices climbing and potential tariffs creating uncertainty in the auto industry, there’s never been a better time to take care of the vehicle you already own. Add in California’s hot summers, and regular maintenance becomes even more important to keep your car running reliably. At Lee’s Service in Reedley and Fresno, we’re here to help you protect your investment. From oil changes and cooling system checks to brake inspections and full diagnostics, our team makes sure your vehicle is ready for whatever the road—and the weather—throws your way. 1. Protect Your Car with Regular Maintenance One of the biggest concerns for car owners in Reedley, Fresno, and surrounding areas is the wear and tear caused by the hot California summers. Proactive maintenance is essential to keep your car running like new. By staying on top of your vehicle's service needs, you can protect essential components like: Engine Fuel System Transmission Cooling System Brakes and Power Steering How It Works: Simply bring your vehicle to Lee's Service for regular service visits. Keep up with recommended oil changes and fluid exchanges. Your vehicle will remain protected from costly failures by maintaining a proper maintenance routine. 2. Stay on Top of Regular Maintenance Routine maintenance is key to ensuring your car runs smoothly for 200,000+ miles. By following these essential maintenance tasks, you can avoid costly repairs: Oil Changes: The heat in California can cause oil to break down faster, so make sure you follow manufacturer recommendations and get regular oil changes. Coolant Flushes: Prevent overheating, especially during the summer months. Transmission Service: Keeps your transmission shifting smoothly and prevents premature failure. Brake & Power Steering Fluid Exchange: Helps maintain your car’s safety and responsiveness. Need an oil change ? Schedule yours at Lee's Service in Reedley or Fresno today! 3. Take Care of Your Tires in California’s Heat California’s hot summers can shorten tire lifespan if not properly maintained. Here's how to ensure your tires last: Check Tire Pressure Weekly: Heat causes air to expand, leading to overinflation. Rotate Tires Every 5,000-7,500 Miles: Prevents uneven wear and improves handling. Get a Wheel Alignment : California’s rough roads can knock your car out of alignment, leading to premature tire wear. Pro Tip: Proper tire care not only improves fuel efficiency but also keeps your car handling safely during California’s rainy season. 4. Avoid Hard Driving to Reduce Wear & Tear California’s mountainous terrain and high-speed highways can add stress to your vehicle. By avoiding aggressive driving habits, you can reduce wear on key components and extend your car’s lifespan: Ease into starts and stops to reduce engine and brake strain. Keep RPMs low to extend the life of your transmission. Use cruise control on highways to maintain steady speeds. California Heat Tip: If your car starts overheating, pull over and turn off the A/C to help it cool down faster. 5. How Tariffs Could Impact the Auto Industry & Used Car Prices With rising tariffs on imported auto parts, new car prices could see a significant increase, meaning demand for used cars will likely continue to rise. How This Affects You: If tariffs drive up the cost of new cars, fewer people will buy them, keeping used car prices high. Replacement parts for repairs and maintenance could become more expensive, making preventative maintenance even more essential. Investing in your current vehicle now can save you money in the long run. Local Insight: Keeping your car in top condition can save you thousands in future repairs, especially if parts and labor costs rise due to tariffs. 6. Use High-Quality Parts & Fluids for California Roads Cheap parts and low-grade fluids won’t stand up to California’s hot and challenging driving conditions. Use Heat-Resistant Oil & Coolant: Helps prevent overheating during the hot summer months. Stick with OEM or Trusted Aftermarket Parts: Quality parts last longer, even on California’s rough roads. Use Premium Gas if Recommended: Helps prevent carbon buildup in high-performance engines. Why Choose Lee's Service? We use only high-quality parts and expert service to keep your car running strong in California’s heat. Final Thoughts: Keep Your Car Running for 200,000+ Miles in Reedley & Fresno, CA With used car prices at record highs and tariffs making vehicle ownership more expensive, now is the time to invest in your car’s longevity. By following a routine maintenance schedule, using quality parts and fluids, and avoiding common wear-and-tear mistakes, you can maximize the life of your car and avoid costly repairs. Need Expert Maintenance in Reedley & Fresno, CA? Schedule an appointment with Lee's Service today, and let our skilled technicians help you extend the life of your vehicle in the California heat!
A tire shop with a lot of tires in front of it.
February 24, 2025
Learn how to choose the best auto repair shop in Fresno, CA with expert tips from Lee’s Service. Discover key factors like certifications, reviews, and service transparency to keep your car running safely.
A car is being aligned with a machine in a garage.
October 21, 2024
Improve tire life and fuel efficiency with regular wheel alignments. Learn how alignment impacts wear, safety, and savings, and when to get your wheels checked.
A man is pouring oil into a car engine.
July 29, 2024
Learn how to bleed a car's cooling system step by step with our detailed guide. Ensure optimal engine performance and prevent overheating by following these easy instructions. Read now!
A person is holding a tablet in front of a car engine.
June 24, 2024
Key Components of an Engine Inspection Checklist: Check Engine Light Diagnosis, Engine Fluid Inspection, Wheel Alignment, Suspension Check, Belts and Hoses, Battery, and Air Filters.
A man is pumping gas into a car at a gas station.
May 28, 2024
Wondering if you can use regular gas in your premium gas car? Discover the potential impacts on performance, engine health, and fuel efficiency in this comprehensive guide by Lee's Service. Get expert insights and tips for maintaining your vehicle's optimal performance.
Show More